This command requires at least two rows of source data

I am getting this error: intermittently on this line of code: There are two worksheets. One has a pivot table and one has raw data. Sometimes there is only one row of data. For multiple rows of data the line of code above always works; however, for only 1 row of data, the code above

I am getting this error:

This command requires at least two rows of source data. You cannot use the command on a selection in only one row. Try the following: - If you're using an advanced filter, select a range of cells that contains at least two rows of data. Then click the Advanced Filter command again. - I you're creating a PivotTable, type a cell reference or select a range that includes at least two rows of data 

intermittently on this line of code:

xlWorkBook.RefreshAll(); 

There are two worksheets. One has a pivot table and one has raw data. Sometimes there is only one row of data. For multiple rows of data the line of code above always works; however, for only 1 row of data, the code above sometimes works, and sometimes I get the error message above.

In addition to this, the worksheet containing the pivot table is not refreshed; however, if I re-open the file, it also does not refresh, unless I explicitly refresh it manually.

What is going on here? Why am I getting this error only sometimes?

Thank you so much for your guidance.

if at all helpful, i am including the entire method:

private void SortandCreateFile(string column, string email, string emailStartPos) { string replacetext = ""; try { var valueRange = xlWorkSheet.get_Range(column + emailStartPos, column + range.Rows.Count.ToString()); var deleteRange = valueRange; xlApp.Visible = false; int startpos = 0; int endPos=0; bool foundStart = false; Excel.Range rng = xlWorkSheet.get_Range(column + "1", column + range.Rows.Count.ToString()); string tempstring = "d"; int INTemailStartPos = Convert.ToInt16(emailStartPos); for (int rCnt = INTemailStartPos; rCnt <= rng.Count; rCnt++) { Excel.Range cell = (Excel.Range)rng[rCnt, 1]; try { if (cell.Value2 != null) tempstring = cell.Value2.ToString(); else { startpos = rCnt; releaseObject(cell); ///////// break; } } catch (Exception ee) { MessageBox.Show(ee.ToString()); } //grab the text from column link texdtbox Excel.Range rngLinkColumn; Excel.Range replacetextcell=null; if (FormControls.ColumnLink.Length > 0) { rngLinkColumn = xlWorkSheet.get_Range(FormControls.ColumnLink + "1", FormControls.ColumnLink + range.Rows.Count.ToString()); replacetextcell = (Excel.Range)rngLinkColumn[rCnt, 1]; } //locate email if (cell.Value2.ToString() == email ) { //we found the starting position of the email we want! //this will tell us which row of data to start from startpos = rCnt; if (FormControls.ColumnLink.Length > 0) replacetext = replacetextcell.Value2.ToString(); releaseObject(cell); ///////// break; } releaseObject(cell); } int foundstartminusONE = startpos - 1; int rngcount = rng.Count + INTemailStartPos; //delete everything from the top UNTIL the row of the email address that we need if (startpos != INTemailStartPos) { deleteRange = xlWorkSheet.get_Range(column + INTemailStartPos.ToString() + ":" + "CF" + foundstartminusONE.ToString(), Type.Missing); deleteRange = deleteRange.EntireRow; deleteRange.Delete(Excel.XlDeleteShiftDirection.xlShiftUp); } for (int rCnt = INTemailStartPos; rCnt <= rng.Count; rCnt++) { Excel.Range cell = (Excel.Range)rng[rCnt, 1]; try { if (cell.Value2 != null ) tempstring = cell.Value2.ToString(); else { endPos = rCnt - 1; releaseObject(cell);//////// break; } } catch (Exception ee) { //MessageBox.Show(ee.ToString()); } //locate email if (cell.Value2.ToString() != email ) { //we found where the last email address is that we need //this is where the issue is occurring i think with the deleting the last row endPos = rCnt; releaseObject(cell);//////// break; } releaseObject(cell); } //delete all the stuff AFTER the email address that we need if (endPos != 0) { deleteRange = xlWorkSheet.get_Range(column + endPos + ":" + "CF" + rngcount.ToString(), Type.Missing); deleteRange = deleteRange.EntireRow; deleteRange.Delete(Excel.XlDeleteShiftDirection.xlShiftUp); } //when the user opens the excel file, we want the focus to be here var rangehome = xlWorkSheet.get_Range(FormControls.FocusOn, FormControls.FocusOn); xlWorkSheet.Activate(); rangehome.Select(); string filename = xlWorkBook.Path + @"\" + email + ".xlsx"; string fileSubstring = filename.Substring(0, filename.IndexOf(".xlsx")); string randomfileString = Guid.NewGuid().ToString("N").Substring(0, 10) + ".xlsx"; string targetfilenameRename = fileSubstring + randomfileString; //((Excel.Worksheet)this.Application.ActiveWorkbook.Sheets[FormControls.WorksheetFocus]).Activate(); //((Excel.Worksheet)Excel.Application.ActiveWorkbook.Sheets[1]).Activate(); Excel.Worksheet xlWorkSheetFocus = (Excel.Worksheet)xlWorkBook.Worksheets.get_Item(FormControls.WorksheetFocus); xlWorkSheetFocus.Activate(); xlWorkBook.SaveAs(targetfilenameRename, Excel.XlFileFormat.xlWorkbookDefault, Type.Missing, Type.Missing, false, false, Excel.XlSaveAsAccessMode.xlNoChange, Type.Missing, Type.Missing, Excel.XlSaveConflictResolution.xlLocalSessionChanges, Type.Missing, Type.Missing); try { xlWorkBook.RefreshAll(); } catch { } xlWorkBook.Save(); string targetfile = xlWorkBook.Path + @"\" + FormControls.FileName + " - " + email.Substring(0, email.IndexOf("@")) + ".xlsx"; System.IO.File.Copy(targetfilenameRename, targetfile, true); string body = FormControls.eMailBody; body = body.Replace("%replacetext%", replacetext); //replace %replacetext% in body string targetfileSubstring = targetfile.Substring(0, targetfile.IndexOf(".xlsx")); string randomString = Guid.NewGuid().ToString("N").Substring(0, 10)+".xlsx"; string targetfileRename = targetfileSubstring+randomString; while (true) { try { SendEmail(targetfile, email, FormControls.eMailSubject, body,FormControls.eMailFrom); } catch (Exception ee) { MessageBox.Show(ee.ToString()); continue; } // all is good break; } releaseObject(valueRange); releaseObject(deleteRange); File.Copy(targetfile, targetfileRename, true); } catch (Exception e) { MessageBox.Show(e.ToString()); } finally { //DisposeMe(); // Release all COM RCWs. // The "releaseObject" will just "do nothing" if null is passed, // so no need to check to find out which need to be released. // The "finally" is run in all cases, even if there was an exception // in the "try". // Note: passing "by ref" so afterwords "xlWorkSheet" will // evaluate to null. See "releaseObject". releaseObject(range); releaseObject(xlWorkSheet); releaseObject(xlWorkBook); // The Quit is done in the finally because we always // want to quit. It is no different than releasing RCWs. if (xlApp != null) { xlApp.Quit(); } releaseObject(xlApp); } } 
7

3 Answers

The only way I could replicate this error with a pivot table was by attempting to create one off a range that didn't have column headers, just like on the screenshot from Stephan1010's answer.

In the GetPivotData Excel function, pivot fields are referred to by their names (=GETPIVOTDATA("EmailAddress",$A$3)); thus, it makes sense to disallow a data source that wouldn't have them.

The solution would be to pivot over a ListObject instead of a Range - in Excel when you select, say, range $A$1:$C$1 and format as table (from the Ribbon), the table that results will span $A$1:$C$2; the contents of the first row becomes the column headers and the second row is a valid, empty record. Interesting to note that this happens (the 2-row span) regardless of whether or not you check the "My table has headers" checkbox (the data will be moved to the first row and the table will contain default "Column1"-"Column2"-"Column3" headers if the checkbox is cleared).

In other words, a ListObject is always a valid data source for a pivot table, while a Range may not contain enough rows. Also if you don't have column headers and you create a pivot table with range $A$1:$C$2, the record at $A$1:$C$1 will be used as column headers, which means that first record is lost.

From the code you have supplied I would presume the pivot table is already present and connected to some [named?] range in a template workbook that contains the macro. Turning your range into a table might be as trivial as selecting format as table from the Ribbon. And then you could have code like this to remove all unnecessary rows while still keeping a valid data source for the pivot table:

 public void DeleteExtraTableRows(string emailAddress, Excel.ListObject table) { try { var rowIndex = 0; var wasDeleted = false; while (rowIndex <= table.ListRows.Count) { if (!wasDeleted) rowIndex++; var row = table.ListRows[rowIndex]; var range = (Excel.Range)row.Range.Cells[1, 1]; var value = range.Value2; if (value != null && !string.Equals(emailAddress, value.ToString())) { row.Delete(); wasDeleted = true; } } } catch (Exception e) { MessageBox.Show(e.Message + "\n\n" + e.StackTrace); } } 

There is also a possibility that the email is never found in the loop's if (cell.Value2.ToString() == email ) condition, which would end up deleting all rows from your range - even if the only difference is an extra space at the end of the in-cell value. With the above code, even if all email addresses get deleted the data source remains a valid one for a pivot table that would be connected to it.

EDIT: In Excel you turn a Range into a ListObject by selecting the range in question and clicking the Format as table Ribbon button, from the Home tab. Alternatively you can create one like this:

 var range = ((Excel.Range)(worksheet.Range[worksheet.Cells[1, 1], worksheet.Cells[3, 1]])); var table = worksheet.ListObjects.Add(SourceType: Excel.XlListObjectSourceType.xlSrcRange, Source: range, XlListObjectHasHeaders: Excel.XlYesNoGuess.xlYes); table.TableStyle = "TableStyleMedium3"; 

In code, you can access all ListObjects on a worksheet using the ListObjects property:

 var worksheet = (Excel.Worksheet) Globals.ThisAddIn.Application.ActiveSheet; var tables = worksheet.ListObjects; 

Then, you can access a specific ListObject /table with several different ways:

 var myTable = tables[1]; var myTable = tables.Item["Table1"]; var myTable = tables.OfType<Excel.ListObject>().FirstOrDefault(t => t.Name == "Table1"); 

As rows are added from the table, the actual range it refers to will be expanded accordingly; use myTable.Range to access the range in question.

9

i suppose this situation occurs because of the pivot tables you got. cause refresh all will trigger pivot table's refresh command too. look at the code below. It may give you an idea about it. Its not about 1 row im sure. i checked it everthing works just fine its most posibly caused by pivot tables.

Microsoft.Office.Interop.Excel.Application xlApp = new Microsoft.Office.Interop.Excel.Application(); Microsoft.Office.Interop.Excel.Workbook xlWorkbook = xlApp.Workbooks.Open("some.xlsx"); // For each worksheet we got foreach (Microsoft.Office.Interop.Excel.Worksheet worksheet in xlWorkbook.Sheets) { // and each pivot table in each worksheet foreach (Microsoft.Office.Interop.Excel.PivotTable pivot in worksheet.PivotTables()) { // disable BackgroundQuery pivot.PivotTableWizard(BackgroundQuery: false); } } // try to refresh all sheet try { xlWorkbook.RefreshAll(); } catch { } // then save xlWorkbook.Save(); 
3

The obvious answer seems to be that sometimes you have one row of data as the source for your pivot table and sometimes you don't - even when you think you still do. I have not been able to create a pivot table(or change the source of a pivot table) to one row of data:

PivotTableErrorExplanation

but if you are able to somehow figure out a way to do this then you have found your answer. There is no reason you can't have one row of data as your source just from a practical/theoretical perspective, but it looks like excel tries to prevent that from happening(maybe because the code assumes two rows). So if you do find a way, then it is probably a bug. Good Luck.

6

ncG1vNJzZmirpJawrLvVnqmfpJ%2Bse6S7zGiorp2jqbawutJoaGtvZWp%2FdYSOrZ%2Biq12YvK65wKebZqqVpsKqvsSsZJqsXaGyor%2FTZquwp12nvLi%2FjKidZqufqr%2BksYydmK2Z

 Share!